E mono chi è?conoscenza ha scritto:Poi prova a dare:
emerge cairo firebird gluezilla sqlite oracle-instantclient-basic
(sono richiesti da mono ma non inclusi in portage)
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package dev-libs/nspr-4.8.9:
*
* Please make sure you run revdep-rebuild after upgrade.
* This is *extremely* important to ensure your system nspr works properly.
*
* Messages for package media-libs/libart_lgpl-2.3.21-r1:
* Running elibtoolize in: libart_lgpl-2.3.21/
* We've already been run in this tree; you should
* avoid this if possible (perhaps by filing a bug)
* Messages for package dev-libs/nss-3.13.1-r2:
* We have reverted back to using upstreams soname.
* Please run revdep-rebuild --library libnss3.so.12 , this
* will correct most issues. If you find a binary that does
* not run please re-emerge package to ensure it properly
* links after upgrade.
*
* Messages for package app-text/hunspell-1.3.2-r3:
* To use this package you will also need a dictionary.
* Hunspell uses myspell format dictionaries; find them
* in the app-dicts category as myspell-<LANG>.
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
* Regenerating GNU info directory index...
* Processed 87 info files.
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
* GNU info directory index is up-to-date.
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
* GNU info directory index is up-to-date.
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package dev-db/firebird-2.0.3.12981.0-r6:
*
* Firebird is no longer installed in /opt. Binaries are in
* /usr/bin. The core, udfs, etc are in /usr/lib/firebird. Logs
* are in /var/log/firebird, and lock files in /var/run/firebird
* The command line tool isql has been renamed to fbsql.
* Please report any problems or issues to bugs.gentoo.org.
*
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
* GNU info directory index is up-to-date.
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
conoscenza ha scritto:Eccomi.
Quando vuoi sapere cosa fa/se è installato o meno/che versioni portage supporta fai:
eix <nome-pacchetto>
Nel caso di mono fai:
eix mono
o
eix dev-lang/mono
Codice: Seleziona tutto
bash: eix: command not found
Cioè, quì dice che con l'opzione --oneshot (-1) si fa emergere un pacchetto ma non viene aggiunto al file del mondo per il prossimo aggiornamento?Per le opzioni guarda sempre il man: nessuno è più chiaro di lui.
"--oneshot (-1)
Emerge as normal, but do not add the packages to the world file for later updating.
"
Visto che sono già su Salix ed in Gentoo, faccio il contrario. Prima faccio un nuovo giro di comandi di aggiornamento/emersione e ti riporto gli output, Poi vado a vedere che succede ad avviare Gentoo.Prova ad avviare la macchina, selezionando Gentoo, che problemi ti da?
Poi ritorna su Salix, monta tutto:
e poi: ... Mi riporti gli output?
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
Codice: Seleziona tutto
>>> Emerging (1 of 29) net-nds/openldap-2.4.28-r1
* openldap-2.4.28.tgz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* rfc2307bis.schema-20100722 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* ERROR: net-nds/openldap-2.4.28-r1 failed (setup phase):
* To build the ldapc++ library you must emerge openldap with sasl support
*
* Call stack:
* ebuild.sh, line 85: Called pkg_setup
* openldap-2.4.28-r1.ebuild, line 215: Called die
* The specific snippet of code:
* die "To build the ldapc++ library you must emerge openldap with sasl support"
*
* If you need support, post the output of 'emerge --info =net-nds/openldap-2.4.28-r1',
* the complete build log and the output of 'emerge -pqv =net-nds/openldap-2.4.28-r1'.
* The complete build log is located at '/var/tmp/portage/net-nds/openldap-2.4.28-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-nds/openldap-2.4.28-r1/temp/die.env'.
* S: '/var/tmp/portage/net-nds/openldap-2.4.28-r1/work/openldap-2.4.28'
>>> Failed to emerge net-nds/openldap-2.4.28-r1, Log file:
>>> '/var/tmp/portage/net-nds/openldap-2.4.28-r1/temp/build.log'
* Messages for package net-nds/openldap-2.4.28-r1:
* ERROR: net-nds/openldap-2.4.28-r1 failed (setup phase):
* To build the ldapc++ library you must emerge openldap with sasl support
*
* Call stack:
* ebuild.sh, line 85: Called pkg_setup
* openldap-2.4.28-r1.ebuild, line 215: Called die
* The specific snippet of code:
* die "To build the ldapc++ library you must emerge openldap with sasl support"
*
* If you need support, post the output of 'emerge --info =net-nds/openldap-2.4.28-r1',
* the complete build log and the output of 'emerge -pqv =net-nds/openldap-2.4.28-r1'.
* The complete build log is located at '/var/tmp/portage/net-nds/openldap-2.4.28-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-nds/openldap-2.4.28-r1/temp/die.env'.
* S: '/var/tmp/portage/net-nds/openldap-2.4.28-r1/work/openldap-2.4.28'
Codice: Seleziona tutto
make: *** [all] Errore 2
emake failed
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
>>> Failed to emerge app-misc/lirc-0.8.7, Log file:
>>> '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'
* Messages for package dev-db/firebird-2.0.3.12981.0-r6:
*
* Firebird is no longer installed in /opt. Binaries are in
* /usr/bin. The core, udfs, etc are in /usr/lib/firebird. Logs
* are in /var/log/firebird, and lock files in /var/run/firebird
* The command line tool isql has been renamed to fbsql.
* Please report any problems or issues to bugs.gentoo.org.
*
* Messages for package app-misc/lirc-0.8.7:
* If your LIRC device requires modules, you'll need MODULE_UNLOAD
* support in your kernel.
*
* Compiling only the lirc-applications, but no drivers.
* Enable drivers with LIRC_DEVICES if you need them.
* Setting default lirc-device to /dev/lirc0
* Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
* ERROR: app-misc/lirc-0.8.7 failed (compile phase):
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS=-m elf_x86_64 all
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 4071: Called linux-mod_src_compile
* environment, line 3128: Called die
* The specific snippet of code:
* eval "emake HOSTCC=\"$(tc-getBUILD_CC)\" CROSS_COMPILE=${CHOST}- LDFLAGS=\"$(get_abi_LDFLAGS)\" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
*
* If you need support, post the output of 'emerge --info =app-misc/lirc-0.8.7',
* the complete build log and the output of 'emerge -pqv =app-misc/lirc-0.8.7'.
* The complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.7/temp/environment'.
* S: '/var/tmp/portage/app-misc/lirc-0.8.7/work/lirc-0.8.7'
* GNU info directory index is up-to-date.
* IMPORTANT: config file '/etc/firebird/security2.fdb' needs updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
O.K. Ma non mi è chiaro perchè non aggiungerlo per il prossimo aggiornamento.conoscenza ha scritto:il -1: emerge normalmente, ma non aggiunge il pacchetto al mondo (nostro sistema) per il prossimo aggiornamento.
Ma se prima lo voleva, una volta mascherato, per continuare non lo chiederà di nuovo?conoscenza ha scritto:Si maschera per evitare che portage lo installi!
Talvolta alcune versioni funzionano altre meno, allora si mascherano le versione che non funzionano per evitare che portage le installi....
Codice: Seleziona tutto
Calculating dependencies... done!
[ebuild N #] app-misc/lirc-0.9.0 USE="X -debug -doc -hardware-carrier -transmitter" LIRC_DEVICES="-accent -act200l -act220l -adaptec -all -alsa_usb -animax -asusdh -atilibusb -atiusb -audio -audio_alsa -avermedia -avermedia98 -avermedia_vdomate -awlibusb -bestbuy -bestbuy2 -breakoutbox -bte -bw6130 -caraca -chronos -commandir -cph06x -creative -creative_infracd -devinput -digimatrix -dsp -dvico -ea65 -ene0100 -exaudio -flyvideo -ftdi -gvbctv5pci -hauppauge -hauppauge_dvb -hercules_smarttv_stereo -i2cuser -igorplugusb -iguanaIR -imon -imon_24g -imon_knob -imon_lcd -imon_pad -imon_rsc -inputlirc -irdeo -irdeo_remote -irlink -irman -irreal -it87 -ite8709 -knc_one -kworld -leadtek_0007 -leadtek_0010 -leadtek_pvr2000 -livedrive_midi -livedrive_seq -logitech -macmini -mediafocusI -mouseremote -mouseremote_ps2 -mp3anywhere -mplay -nslu2 -packard_bell -parallel -pcmak -pcmak_usb -pctv -pixelview_bt878 -pixelview_pak -pixelview_pro -provideo -realmagic -remote_wonder_plus -remotemaster -sa1100 -samsung -sasem -sb0540 -serial -serial_igor_cesko -silitek -sir -slinke -streamzap -tekram -tekram_bt829 -tira -ttusbir -tuxbox -tvbox -udp -uirt2 -uirt2_raw -usb_uirt_raw -usbirboy -usbx -userspace -wpc8769l -xboxusb"
[ebuild N ] x11-libs/libnotify-0.7.4 USE="introspection -doc -test"
[ebuild N ] xfce-base/xfce4-settings-4.8.3 USE="libnotify xklavier -debug -libcanberra"
[ebuild N ] net-print/cups-1.4.8-r1 USE="X acl dbus filters gnutls jpeg pam perl png python ssl static-libs threads tiff -debug -java -kerberos -ldap -php -slp -xinetd" LINGUAS="-da -de -es -eu -fi -fr -id -it -ja -ko -nl -no -pl -pt -pt_BR -ru -sv -zh -zh_TW"
[ebuild N ] app-text/ghostscript-gpl-9.04-r4 USE="X cups dbus djvu gtk jpeg2k static-libs -bindist -idn" LINGUAS="-ja -ko -zh_CN -zh_TW"
[ebuild N ] net-print/foomatic-filters-4.0.9 USE="cups dbus"
[ebuild N ] net-wireless/bluez-4.98-r2 USE="alsa consolekit cups gstreamer readline usb -caps -debug -pcmcia -test-programs"
[ebuild N ] net-misc/networkmanager-0.8.4.0-r2 USE="bluetooth gnutls ppp -avahi -connection-sharing -dhclient -dhcpcd -doc -nss -resolvconf"
[ebuild N ] net-libs/libproxy-0.4.7 USE="gnome mono networkmanager perl python -kde -test"
[ebuild N ] net-libs/glib-networking-2.30.1-r1 USE="gnome libproxy ssl"
[ebuild N ] net-libs/libsoup-2.36.1 USE="introspection ssl -debug -doc -samba -test"
[ebuild N ] dev-libs/openobex-1.5 USE="bluetooth syslog usb -debug -irda"
[ebuild N ] app-mobilephone/obex-data-server-0.4.5 USE="gtk imagemagick usb -debug"
[ebuild N ] media-sound/pulseaudio-1.1-r1 USE="X alsa asyncns bluetooth caps dbus glib gnome ipv6 lirc orc ssl tcpd udev -avahi -doc -equalizer -jack -libsamplerate (-oss) -realtime (-system-wide) -test"
[ebuild N ] media-libs/libcanberra-0.28-r5 USE="alsa gnome gstreamer gtk gtk3 oss pulseaudio sound udev -tdb"
[ebuild N ] x11-misc/notification-daemon-0.5.0
[ebuild N ] virtual/notification-daemon-0 USE="gnome"
[ebuild N ] sys-apps/sg3_utils-1.29
[ebuild N ] sys-apps/rescan-scsi-bus-1.29
[ebuild N ] sys-fs/udisks-1.0.4-r1 USE="nls -debug -doc -remote-access"
[ebuild N ] sys-apps/gnome-disk-utility-3.0.2-r200 USE="fat -avahi -doc -gnome-keyring -nautilus -remote-access"
[ebuild N ] gnome-base/gnome-keyring-2.32.1-r1 USE="pam -debug -doc -test"
[ebuild N ] gnome-base/libgnome-keyring-2.32.0 USE="-debug -doc -test"
[ebuild N ] net-libs/libsoup-gnome-2.36.1 USE="introspection -debug -doc"
[ebuild N ] gnome-base/gvfs-1.10.1 USE="bluetooth cdda fuse gdu gphoto2 http udev -afp -archive -avahi -bluray -doc -gnome-keyring -ios -samba"
[ebuild N ] xfce-base/thunar-1.2.3 USE="dbus exif libnotify pcre startup-notification udev -debug -test" XFCE_PLUGINS="trash"
[ebuild N ] xfce-base/xfdesktop-4.8.3 USE="libnotify thunar -debug"
[ebuild N ] xfce-base/xfce4-meta-4.8 USE="session svg -minimal"
The following keyword changes are necessary to proceed:
#required by media-sound/pulseaudio-1.1-r1[lirc], required by media-libs/libcanberra-0.28-r5[pulseaudio], required by x11-misc/notification-daemon-0.5.0, required by virtual/notification-daemon-0[gnome], required by x11-libs/libnotify-0.7.4, required by xfce-base/thunar-1.2.3[libnotify], required by xfce-base/xfdesktop-4.8.3[thunar], required by xfce-base/xfce4-meta-4.8, required by xfce4-meta (argument)
=app-misc/lirc-0.9.0 ~amd64
The following mask changes are necessary to proceed:
#required by media-sound/pulseaudio-1.1-r1[lirc], required by media-libs/libcanberra-0.28-r5[pulseaudio], required by x11-misc/notification-daemon-0.5.0, required by virtual/notification-daemon-0[gnome], required by x11-libs/libnotify-0.7.4, required by xfce-base/thunar-1.2.3[libnotify], required by xfce-base/xfdesktop-4.8.3[thunar], required by xfce-base/xfce4-meta-4.8, required by xfce4-meta (argument)
# /etc/portage/package.mask:
=app-misc/lirc-0.9.0
NOTE: The --autounmask-keep-masks option will prevent emerge
from creating package.unmask or ** keyword changes.
Use --autounmask-write to write changes to config files (honoring CONFIG_PROTECT).